API 650 Service Test
API 650 Service Test
(OP)
Gentlemen,
We are in the situation in which our newly constructed tanks (U&O Area)shall undergo a hydrostatic test. Nevertheless , the contractor is suggesting to proceed with the Service Test instead of hydrostatic test. Could anyone can point out on API 650 which allows this practice?
We are in the situation in which our newly constructed tanks (U&O Area)shall undergo a hydrostatic test. Nevertheless , the contractor is suggesting to proceed with the Service Test instead of hydrostatic test. Could anyone can point out on API 650 which allows this practice?





RE: API 650 Service Test
RE: API 650 Service Test
Define service test, do you mean a startup test of filling with oil? API 650, Chapter 7 Section 7.3.5 allows for an alternate to hydrotesting if water is not available. This is something the purchaser would have to approve. Open some communication with the contractor, ask them for the reference of API 650.
"Saving the World One Beam at a Time"
RE: API 650 Service Test
In Section 5.3, API-650 is quite clear about testing requirements and alternatives. "In service" testing is not an alternative,,,!
Ask to see his copy of API-650 and point this out to him.
"In service" leak testing is SOMETIMES allowed for selected piping systems constructed to the ASME B31.1 and B31.3 codes.
API-650 outlines some other important considerations regarding the timing of the hydrotest and the final tank coatings, final ladder/accessory attachments etc.
Also, just for fun, ask this guy about other jobs he has performed a "service test"
My opinion only
-MJC
RE: API 650 Service Test
RE: API 650 Service Test