UGII_SMP_ENABLE
UGII_SMP_ENABLE
(OP)
Question about the UGII_SMP_ENABLE variable, if this is set to 1 in the UGII_ENV.DAT file thus this only affect working with parasolids and/or some booleans operations? Or whill general preformance of NX be improved?
I'm working on NX4.0.4.2 with MP6 on a Dell Precision T7400, with 2 Intel Xeon E5410@2.33GHz processors.
Thanks in advance,
best regards,
Michaël.
I'm working on NX4.0.4.2 with MP6 on a Dell Precision T7400, with 2 Intel Xeon E5410@2.33GHz processors.
Thanks in advance,
best regards,
Michaël.





RE: UGII_SMP_ENABLE
John Joyce
Tata Technologies
1675 Larimer St.
Denver, CO
www.myigetit.com
NX3,4,5,6 Solid Works, Pro/e, Solid Edge