title blocks
title blocks
(OP)
How do you set up sheet formats with title blocks. What I want to do is two things. Like starting from scratch except I already have an existing title block I want to use with company name and all that.
1. I need to set up the drawings with title blocks on them, a,b,c, and d size.
2. If needed I want to be able to change sheet sizes and the new sheet size has its own title block. So if I start a b-size drawing and decide half way thru detailing that it would fit better on a c-size I can easily change sizes and title blocks.
Thanks!
1. I need to set up the drawings with title blocks on them, a,b,c, and d size.
2. If needed I want to be able to change sheet sizes and the new sheet size has its own title block. So if I start a b-size drawing and decide half way thru detailing that it would fit better on a c-size I can easily change sizes and title blocks.
Thanks!





RE: title blocks
File - New - Drawiwng (select sheet size)
Edit - Sheet BackGround - Frame & Title Block
This works quite well, as there are several automatic functions built into the script, I.E.; size to sheet, resize to changed sheet, revision blocks, etc.
NOTE: I am not a CATScript (VBasic) expert. I just printed out the CATScript, found the pertinent sections, and revised them.
RE: title blocks
RE: title blocks
There's also one over at http://
RE: title blocks
In an open drawing:
Tools - Macro - Macros
This will show the location of the files and the 3 samples from CATIA. You can also run the edit & save as a new file process.
catiajim:
I couldn't find a specific file for d-load, and I don't have site access anyway. Could the file be placed somewhere we could get to?