Configuring Toolbox for stock fasteners
Configuring Toolbox for stock fasteners
(OP)
I have searched this forum and elsewhere and not found the definitive answer I am looking for. Can someone tell me how to configure/load toolbox with all my fasteners that we currently stock. I want to assign our part numbers and descriptions to suitable properties of the fasteners. Ideally, I would like our users to pick the fastener they need for an application, such as an M4x0.7x10 Hex SHCS (the description) OR by our part number.
I expect to be able to load our company part numbers and descriptions by filling a design table.
Of course, we need to keep the ability to create a fastener that isn't in our inventory.
The referenced thread is closed, but it does not completely answer my questions. thread559-216761: How to create Parts from ToolBox
Thanks in advance,
- - -Updraft
I expect to be able to load our company part numbers and descriptions by filling a design table.
Of course, we need to keep the ability to create a fastener that isn't in our inventory.
The referenced thread is closed, but it does not completely answer my questions. thread559-216761: How to create Parts from ToolBox
Thanks in advance,
- - -Updraft






RE: Configuring Toolbox for stock fasteners
http://www
Artem Taturevich
CSWP
RE: Configuring Toolbox for stock fasteners
By using Toolbox we pick up on all the predefined standards, smart mates, etc., plus we can can easily add a new item from a category we don't already have defined.
I just want to tell Toolbox which items we have and what our part numbers and descriptions are.
- - -Updraft
RE: Configuring Toolbox for stock fasteners
You can do this by clicking "Add to Library" command which is available under Part's general context menu (rigth mouse click in the empty view area or Part's icon in FM Design Tree)
Artem Taturevich
CSWP