×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

PLM World June 1 - 5

PLM World June 1 - 5

PLM World June 1 - 5

(OP)
Is anyone going to PLM World the week of June 1st?

I will be there and it would be nice to place a face to some of the posters here.

I will be giving a presentation on Tuesday afternoon at 1:00 in the CAM sig.

 

John Joyce
Tata Technologies
1675 Larimer St.
Denver, CO
www.myigetit.com

NX3,4,5,6 Solid Works, Pro/e, Solid Edge

RE: PLM World June 1 - 5

For people not attending, would it be possible to post some of the presentations here, after the conference is over?  It might be very useful to disseminate some of the information.

RE: PLM World June 1 - 5

I will be there as well.

In addition to my 'Design (NX)' track session, 'What's new in NX 7.0', on Monday from 1:45pm - 3:45pm in the 'Delta Ballroom A' (which will be repeated on Thursday from 9:30am - 10:55am in 'Canal A'), I will also be providing NX demo support for Bob Brandenstein's 'System Administration (NX)' track session ,'Introducing NX 6.0 on MacOS', on Wednesday from 1:00pm - 1:40pm in 'Bayou A'.

Also note that I will be participating in the Sunday 'Industry Night Events' from 6:30pm - 8:30pm.  The session which I will be hosting covers 'Machinery & Industrial' (after all, I did spend over 14 years actually working as a machine designer for a multi-national manufacturer of capital machinery used in the food & chemical industries, so I can at least speak the language).

Anyway, I hope to see all of you there.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.
 

RE: PLM World June 1 - 5

If you are member (i.e. a 'Citizen') of PLM World, I think you can access the presentations from their website after the conference is over.

For more information about PLM World and how to join, go to...

http://plmworld.org/

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.
 

RE: PLM World June 1 - 5

(OP)
John,

 It would not be the same without the "John Baker Show"

 

John Joyce
Tata Technologies
1675 Larimer St.
Denver, CO
www.myigetit.com

NX3,4,5,6 Solid Works, Pro/e, Solid Edge

RE: PLM World June 1 - 5

Not going this year. Economy in the dumps. with No I-Deas content at all no reason for me to go.  We are now transfering from TDM to Teamcenter so the people that are doing that will probably go next year.  We went last year and it was ok.  Hopefully going to NX7 in about a year or so.

RE: PLM World June 1 - 5

The material presented at the conference is copyrighted and cannot be posted to an open forum like this one.

I think the CDs of the conference presentations have been offerred for sale to non-attendees a couple of months after the conference.

Getting the presentations is a benefit of attending the conference.

I will not be there :(
 

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

RE: PLM World June 1 - 5

Hey !!

It looks like I will get to go.

We will be upgraiding to NX6 and getting some new hardware.

See some of you there.

 

RE: PLM World June 1 - 5

John,

I checked on the plmworld.org website, and unfortunately there are no presentation files available from your talk "What's New in NX 7.0 - Design (NX)".

Can you share any information about this topic here?

Thanks.

RE: PLM World June 1 - 5

That's because I don't do PowerPoint (except for a picture of my girls).  My session is 98% live demos.  And NO, there was no video recording of my session(s) this year.

As for what I did, I first demoed a 32 years old GRIP program just to prove that I could winky smile

I then showed several new improvements to NX 7.0 including some enhancements to extrude/revolve, display of your models, some sheetmetal design in context of an assembly.

I then spent a fair amount of time showing several new capabilities being added to Synchronous Modeling, both History and History-Free.

And then ended it with a bit of 'teaser' from NX 7.5, 3-Face Blending.

And that was about it.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.
 

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources