Frequency Response Analysis for Diagnosis of Power Transformers
Frequency Response Analysis for Diagnosis of Power Transformers
(OP)
Hi everybody,
Do you have experience with the FRA method for detection of deformations in power transformers?
If you have had experience with this method, I would appreaciate very much your comments.
Best regards,
JLVC
Do you have experience with the FRA method for detection of deformations in power transformers?
If you have had experience with this method, I would appreaciate very much your comments.
Best regards,
JLVC






RE: Frequency Response Analysis for Diagnosis of Power Transformers
You can look at the thread
thread238-214242: Frequency Response Analysis (FRA)
There's other thread about this, just search for "FRA" on the forum
RE: Frequency Response Analysis for Diagnosis of Power Transformers
You might want to try Doble in the UK and see if John Lapworth is still working for them. He was one of the UK's leading experts on the technique.
----------------------------------
If we learn from our mistakes I'm getting a great education!
RE: Frequency Response Analysis for Diagnosis of Power Transformers