×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Full vs partial threaded machine screws

Full vs partial threaded machine screws

Full vs partial threaded machine screws

(OP)
I have some questions concerning machine screws. In what situations are full and partial threaded screws interchangeable? Does it matter which ones are used in a prestressed joint with no shear stress other than friction from threads etc? How about fatigue-wise with dynamic loads?

RE: Full vs partial threaded machine screws

Partial threaded and fully threaded screws are not interchangeable for structural applications.  If you have to perform calculations or testing in order to validate the joint, then they are not interchangeable.  Fully threaded screws will have lower stiffness, and therefore change the load relation of the screw vs. the joint.  Loosening and fatigue characteristics will vary depending on the manner in which the threads are rolled, meaning exact geometry of the threads, where the thread run out occurs along the shank, etc.  Have you consulted any of the usual fastener references like Bickford & Nassar's Handbook of Bolts and Bolted Joints?

RE: Full vs partial threaded machine screws

Would not recommend partial threads on dynamic loads only full length threads.
Check out the Machinist Handbook for a formula on length of engagemnt for threads.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources