How to extrud a 0.5 macrometer pad
How to extrud a 0.5 macrometer pad
(OP)
How to extrud a 0.5 macrometer pad
Forever Young.....
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
How to extrud a 0.5 macrometer pad
|
RE: How to extrud a 0.5 macrometer pad
You can read this at: http:
"After addressing the small scale management needs of the micro-electro-mechanical systems industry in V5.18, CATIA V5.19 delivers large scale management (from 0.1 mm up to 10 kms) capabilities using mechanical infrastructure. This infrastructure enables the user to design large scale 3D objects, such as dams, and to benefit from complete integration in the Generative Drafting and 2D Layout products."
RE: How to extrud a 0.5 macrometer pad
The objects are in marometer scale. say 10 macro by 10 macro by 0.5 macrometer high.
I changed the units but didn't work.
Forever Young.....
RE: How to extrud a 0.5 macrometer pad
RE: How to extrud a 0.5 macrometer pad
RE: How to extrud a 0.5 macrometer pad
Forever Young.....