NBIC Commissioned Inspectors training
NBIC Commissioned Inspectors training
(OP)
I am looking for different training facilities that prepare for the National Board Commissioned Inspectors exam. I am in British Columbia, Canada and the nearer the better. However I am expecting that I will have to travel to the USA. Please post your experiences.





RE: NBIC Commissioned Inspectors training
Remember that AIA's are looking for people who either already have the commission, or are motivated enough to pass the exam. (with or without the prep course)
RE: NBIC Commissioned Inspectors training
BI&I is the one i would recommend as they teach it very well and have a good success rate with candiates passing it.
You can also contact the National Board themselves and sign up for the 2 week pre commision course. I enjoyed the courses at Columbus.
NB#12570ABN
RE: NBIC Commissioned Inspectors training
http://ccs.goivytech.net/boiler_pressure/faq.html
You can also take the National Board's course by mail or online for the first week of the course without traveling there and try the test without the second week. If you have done any calculations for design you should be OK.
RE: NBIC Commissioned Inspectors training
I contacted BI&I and they no longer offer a program.
I am looking at the Ivytech as they claim 97% pass rate. Ideally this is the route I would like to go.
Anyone care to share there experiences with Ivytech?
I would still like to hear more options if anyone knows of other facilities.
RE: NBIC Commissioned Inspectors training
Can you please provide sample questions .couldn't find any information on the web .
Thank you
RE: NBIC Commissioned Inspectors training
Yes Ivytech as they claim 97% pass rate
Contact:
Rod Dowell
Manager
(812) 298-2492
rdowell3@ivytech.edu
Brenda McQueen
Assistant
(812) 298-2353
bmcqueen@ivytech.edu
did so
RE: NBIC Commissioned Inspectors training
Located in Atlanta :
Contact : 404 983 2666
www.Nosiborconsulting.com
RE: NBIC Commissioned Inspectors training
"structured lesson plans and handouts, is presented in a casual manner allowing for more instructor student interaction. This instructor student interaction can address general or specific concerns or issues.
Instructors for our ASME Code and National Board Inspection Code Training, hold current National Board Commissions with the A, N, S, B and I endorsements"
Lead Instructor [Harold "Rob" Robison] has over 30 years of experience.
Next classes will be :
November 9 thru 20
National Board Commissioned Inspector's Examination School in San Diego California
Feburary 15 thru 26
November 9 thru 20
National Board Commissioned Inspector's Examination School in San Diego California
check out their website for further details
www.NosiborConsulting.com
404.983.2666
NosiborConsulting@email.com
Lead Instructor: Harold Robison