SMT compression connector .050 pitch - Who makes em'?
SMT compression connector .050 pitch - Who makes em'?
(OP)
Hello everyone. I'll ask here too.
Searching for compression connector and spring finger connector on the web returned surprisingly poor results. I would like a few manufacturer names of .050 pitch surface mount compression connectors that are able to withstand high vibration and shock. Board spacing of 6mm. I found a Teledyne web page. Any other vendors?
advTHANKSance
Winkler
Searching for compression connector and spring finger connector on the web returned surprisingly poor results. I would like a few manufacturer names of .050 pitch surface mount compression connectors that are able to withstand high vibration and shock. Board spacing of 6mm. I found a Teledyne web page. Any other vendors?
advTHANKSance
Winkler





RE: SMT compression connector .050 pitch - Who makes em'?
http://www.molex.com/cgi-bin/bv/molex/home_init.jsp?x=y&BV_SessionID=@@@@1004599051.1021921798@@@@&BV_EngineID=dadcedkelmfjbekgchecfclk.0&langPref=english&sNav=/cgi-bin/bv/molex/nav/mxleft_nav.jsp%3Fchannel%3DProducts%26chanName%3Dfamily%26familyOID%3D-10305%26frellink%3DIntroduction%26BV_SessionID%3D@@@@1004599051.1021921798@@@@%26BV_EngineID%3Ddadcedkelmfjbekgchecfclk.0&mCnt=/cgi-bin/bv/molex/family/intro.jsp%3FpageTitle%3DIntroduction%26oid%3D-10305%26BV_SessionID%3D@@@@1004599051.1021921798@@@@%26BV_EngineID%3Ddadcedkelmfjbekgchecfclk.0
Or just go to www.molex.com.
RE: SMT compression connector .050 pitch - Who makes em'?
You probably know of JST already, anyways they make lots of connectors, may be worth checking if not already done:
www.jst.com
best regards
RE: SMT compression connector .050 pitch - Who makes em'?
www.samtec.com
Steve Smith
Product Engineer
Staco Energy Products Co.
www.stacoenergy.com