×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

end condition of glu lam

end condition of glu lam

end condition of glu lam

(OP)
I have a client who would like to miter the end of a glulam beam at a 45degree angle.  They have 2 glulams coming together at the same elevation and the same bearing point and they want to avoid a hanger, so both beams would be mitered to fit together.  Even with the miter I have my proper bearing area (2x6 walls help) but I am still concerned about the tension side of the beam.  Any ideas about how I would go about analyzing this?

RE: end condition of glu lam

Is it the cost of the Hanger?

A Kerf connection would be hidden if that's what they want.

Mike McCann
MMC Engineering

RE: end condition of glu lam

(OP)
Cost is not the concern but they do want something hidden.  I must admit I don't know what a kerf connection is, can you explain?? The load is 10kips. Thanks a bunch?

RE: end condition of glu lam

It really is a simple connection.  All it involves is a single plate selded to a base plate, on the top for the beams, and the bottom for the columns, with thru bolts as required.  A kerf is cut into the center of the end of the beam to receive the plate, the reason why it is called a kerf plate.  For the two beam situation, there will be two "knife" or "kerf" plates on the top of the bearing plate, each along the centerline of the beam to be connected.   If the connection to the column below is hidden, then you may be able to get away with two side tab plates below the beam bearing plate.

Mike McCann
MMC Engineering

RE: end condition of glu lam

(OP)
Ahh. I think I know what you are talking about.  So I think what you call a kerf cut is the same as a plunge cut, is it not? I designed a log beam connection once like this.  Great idea, thanks a bunch.   

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources