Auger flight size
Auger flight size
(OP)
Here is attached problem. We are very limited on space. Input will be air blown cement, out put needed is 2.5 tons per hr. A debate is on about useing a 6"Dia. Starting from left with a 4" flight and 6" flight at end of auger#2. Auger #1 is 6" flight at 1 to 1 pitch.
Auger #2 is trough, Auger #1 is tubular.
Any tips on the cross-over augers(Auger#2 delivering to Auger#1) is next question.
Auger #2 is trough, Auger #1 is tubular.
Any tips on the cross-over augers(Auger#2 delivering to Auger#1) is next question.




