ESFRs in ceilings
ESFRs in ceilings
(OP)
Curious...has anyone come accross an escutcheon or such that would provide a 'finished' look when trimming ESFRs (1" thread) in a ceiling?
Thanks in advance.
Thanks in advance.
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: ESFRs in ceilings
I am aware of the Tyco K=11.2 sprinkler that has an escutcheon plate (I believe they call it their "casino sprinkler") but not an ESFR sprinkler.
RE: ESFRs in ceilings
not sure what you are looking for
http://www.umei.com/canopy-s.htm
RE: ESFRs in ceilings
I checked out the UMX site but it appears they only have 1/2" and 3/4" (like the other manufacturers I've seen). I've sent an email to see if they provide a 1" variety.
I'm looking for a 'donkey dick' style:) that would be for a 1" sprinkler and allow the deflector the minimum 6" below the ceiling.
The last time I came across ESFRs in a ceiling, we ended up caulking the pipe at the ceiling and having some of the pipe exposed. Not the most attractive:) but since they were 25'+ ceilings in a storage occupancy it wasn't objected to. I would like to find a better way of doing it if something was feasible while maintaining accordance with the standards and sprinkler listing.
Thanks again.
RE: ESFRs in ceilings
1 1/2 inch??
http
have a sheet metal shop make them???
htt
RE: ESFRs in ceilings
wall plates and pipe mounting hardware:
http://www
RE: ESFRs in ceilings
RE: ESFRs in ceilings
have not seen esfrs below a ceiling, but anyway have you called the maker seems like you should not be the only one with the question
RE: ESFRs in ceilings