ISV
ISV
(OP)
Godd afternood all
Im having problems with the ISV,get an error message
"Failed to initialize machine tool driver. MTD driver may not be valid.
Ive looked through help menu, Step 4 Mounting the part, and it says you must ensure that
A machine tool driver exists in the proper directory of your NX installation.
The problem is it doesnt as far as I can see tell you where that directory is located.
I would like to check that we have the driver installed could anyone tell me where its kept please?
Im running NX6
Thanks
Im having problems with the ISV,get an error message
"Failed to initialize machine tool driver. MTD driver may not be valid.
Ive looked through help menu, Step 4 Mounting the part, and it says you must ensure that
A machine tool driver exists in the proper directory of your NX installation.
The problem is it doesnt as far as I can see tell you where that directory is located.
I would like to check that we have the driver installed could anyone tell me where its kept please?
Im running NX6
Thanks





RE: ISV
C:\Program Files\UGS\NX 6.0\MACH\resource\library\machine\installed_machines
This has been mentioned many times but ISV REALLY needs some serious documentation help. And not from additional paid for training programs. I work for a small shop. We hoped to get Vericut but cost is the factor this year. That said, I can put together a machine much easier than with ISV. I hope more effort is put into ISV to become user friendly.
--
Bill
RE: ISV
I am aware of location of machine models but dont understand where the MTD is located, basically I need to establish if the MTD is a file located within NX and when knowing its location if Ive got it?
RE: ISV
Still, a very daunting task for many. I really need to get this going as well.
--
Bill