Mastercam - SolidWorks - PDMWorks Enterprise?
Mastercam - SolidWorks - PDMWorks Enterprise?
(OP)
We run Mastercam (X3) and PDMWorks Enterprise.
It appears these 2 programs don't play nicely. It's gotten to the point where we have to keep all our Mastercam files outside of PDMWorks Enterprise, which is frustrating, as PDMWorks Enterprise would be an excelent tool for managing them, along with their SolidWorks files.
Does anyone have experience with Mastercam and a PDM package? Do you have issues with it? I can't find much help out there, and both Mastercam and PDMWorks Enterprise point the finger at each other.
Thanks for any advice,
Jack
It appears these 2 programs don't play nicely. It's gotten to the point where we have to keep all our Mastercam files outside of PDMWorks Enterprise, which is frustrating, as PDMWorks Enterprise would be an excelent tool for managing them, along with their SolidWorks files.
Does anyone have experience with Mastercam and a PDM package? Do you have issues with it? I can't find much help out there, and both Mastercam and PDMWorks Enterprise point the finger at each other.
Thanks for any advice,
Jack






RE: Mastercam - SolidWorks - PDMWorks Enterprise?
Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 08
ctopher's home (updated Aug 5, 2008)
ctopher's blog
SolidWorks Legion
RE: Mastercam - SolidWorks - PDMWorks Enterprise?
But we were told by our VAR that SWx Enterprise can read in most all file types. This is concern for us because we want to store our ECAD data.
Heckler![[americanflag] americanflag](https://www.tipmaster.com/images/americanflag.gif)
Sr. Mechanical Engineer
o
_`\(,_
(_)/ (_)
This post contains no political overtones or undertones for that matter and in no way represents the poster's political agenda.