GEC K1AF
GEC K1AF
(OP)
I am busy with a installation of a new feeder onto an existing board. I would like to joggle onto the existing busbars.
I have had different explanations of the GEC K1AF feeder. Some people tell me the busbars are insulated by oil (Making joggle impossible) and others tell me the breaker is only oil and the busbars are air insualted on epoxy bushings.
Has anyone had experience with these feeders and can they let me know if the busbars are in oil
I have attached a picture of the panels.
I have had different explanations of the GEC K1AF feeder. Some people tell me the busbars are insulated by oil (Making joggle impossible) and others tell me the breaker is only oil and the busbars are air insualted on epoxy bushings.
Has anyone had experience with these feeders and can they let me know if the busbars are in oil
I have attached a picture of the panels.





