Need official blueprints to creat a 3D model...
Need official blueprints to creat a 3D model...
(OP)
Can anyone please tell me where I can find official structural blueprints (front, lft, rt, top and bottom **including panels) for the A-10C, HC-130, and HH-60. I am trying to build correct and to-scale 3D models of these arcft for training and other aps. Any help would be great. I have already looked in the GS series T.O.s but no joy (illustrations are way off). Thanks again.





RE: Need official blueprints to creat a 3D model...
If so you should be able to ask your contracting officer for it.
I used to look more at the store AEII's but I think they had them for aircraft too, this would give out line dimensions etc. but not in the detail you may need.
Look around really closely and you may be able to find something existing, a colleague did this for the F16 when we were looking at doing some aero analysis of a stores interface.
KENAT,
Have you reminded yourself of FAQ731-376: Eng-Tips.com Forum Policies recently, or taken a look at http://eng-tips.com/market.cfm?
RE: Need official blueprints to creat a 3D model...
RE: Need official blueprints to creat a 3D model...
Basically an outline drawing of things like stores, bomb racks etc.
I thought maybe there was the same, or equivalent, for the aircraft them selves but I may be imagining it.
KENAT,
Have you reminded yourself of FAQ731-376: Eng-Tips.com Forum Policies recently, or taken a look at http://eng-tips.com/market.cfm?
RE: Need official blueprints to creat a 3D model...
RE: Need official blueprints to creat a 3D model...
htt
I used the wrong term. AEII was specific drawing for a store. The big Manual is the ASIM. I'm not sure it'll have all the info you need though.
KENAT,
Have you reminded yourself of FAQ731-376: Eng-Tips.com Forum Policies recently, or taken a look at http://eng-tips.com/market.cfm?
RE: Need official blueprints to creat a 3D model...
T.Solinski
Former C/KC-135 Structrual Engineer.