Spreadsheet help in NX4 wanted!
Spreadsheet help in NX4 wanted!
(OP)
Hi,
Firstly thanks for taking the time to read this!
I currently use the spreadsheet function in NX4 to output the xyz coordinates of points within the part file. I could do with also finding a way to output the dimensions generated in a series of sketches (and naming said dimensions). What I need to output is 2 lengths and an angle.
I've tried looking in the help files and can't find anything particularly useful so all help gratefully accepted!
Thanks again
R
Firstly thanks for taking the time to read this!
I currently use the spreadsheet function in NX4 to output the xyz coordinates of points within the part file. I could do with also finding a way to output the dimensions generated in a series of sketches (and naming said dimensions). What I need to output is 2 lengths and an angle.
I've tried looking in the help files and can't find anything particularly useful so all help gratefully accepted!
Thanks again
R





RE: Spreadsheet help in NX4 wanted!
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/
To an Engineer, the glass is twice as big as it needs to be.