Heat loss from un-insulated stainless tube
Heat loss from un-insulated stainless tube
(OP)
I am trying to check heat loss calcs for both stainless tube (of different sizes) and from tanks when they are being CIP cleaned at about 80 Deg C
This is confirm sizing of a ventilation system for the process room.
Does anyone have the correct calcs at their finger tips or can direct me to a good site?
thanks
This is confirm sizing of a ventilation system for the process room.
Does anyone have the correct calcs at their finger tips or can direct me to a good site?
thanks





RE: Heat loss from un-insulated stainless tube
Steve Jones
Materials & Corrosion Engineer
http://www.linkedin.com/pub/8/83b/b04