100 Degree Countersink Tolerances
100 Degree Countersink Tolerances
(OP)
I am working with 100 Degree Countesunk NAS hardware and I am looking for good objective standard tolerances for drawings. Any advice and/or direction towards some standards would be greatly appreciated
BW2469
BW2469





RE: 100 Degree Countersink Tolerances
Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 08
ctopher's home (updated Aug 5, 2008)
ctopher's blog
SolidWorks Legion
RE: 100 Degree Countersink Tolerances
I can generate my own...usually .030 to .031 over and Position accordingly.
I was just hoping that perhaps there were some standards already available.
RE: 100 Degree Countersink Tolerances
Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 08
ctopher's home (updated Aug 5, 2008)
ctopher's blog
SolidWorks Legion
RE: 100 Degree Countersink Tolerances
IF this sparks interest in the future, I could post somewhere
Thanks for the help