SheetMetal Assembly cut/intersection for part develpment
SheetMetal Assembly cut/intersection for part develpment
(OP)
Dear SolidWorks Users,
This was troubling me from quite sometime:
1)Our customers in HVAC or distillation column etc want to use sheetmetal assembly operation info in part.For example, two cylinders intersecting 90 degrees and they want to get this curve for manufactring individual parts(for surface development).This may be with Lofts also.
2)Another thing is, Do SWX have any function to get all sheetmetal part development in one sheet for lasercutting purpose?
I asked SWX support but they denied any such functionalities , but users worldwide is using this in their domains, any work around?
This was troubling me from quite sometime:
1)Our customers in HVAC or distillation column etc want to use sheetmetal assembly operation info in part.For example, two cylinders intersecting 90 degrees and they want to get this curve for manufactring individual parts(for surface development).This may be with Lofts also.
2)Another thing is, Do SWX have any function to get all sheetmetal part development in one sheet for lasercutting purpose?
I asked SWX support but they denied any such functionalities , but users worldwide is using this in their domains, any work around?
CSWP,on SWPM 2008 SP2 Cosmos ADV Prof,Flowroks.
Dell M90,2GB RAM,Nvidia Quadro FX 3500.






RE: SheetMetal Assembly cut/intersection for part develpment
Try thread559-199521: Problem Converting Cone To Sheet Metal Part. Some of the links may help.
Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 06/08
ctopher's home (updated Jul 13, 2008)