1/8" BSP Helicoil
1/8" BSP Helicoil
(OP)
Hi all,
We got in some 1/8" BSP helicoils, 1/4 inch long, recently but we thing they're the wrong size. Doe sanyone know what they're ID should be?
God bless,
Phil.
We got in some 1/8" BSP helicoils, 1/4 inch long, recently but we thing they're the wrong size. Doe sanyone know what they're ID should be?
God bless,
Phil.





RE: 1/8" BSP Helicoil
I don't have any BSP's here to check, but seeing what the average helicoil's I/D is compared to the parent thread's minor diameter, I'd say 1/8" BSP helicoil shoud be a little over 5/16" I/D and about 10mm O/D (don't forget that the 1/8" refers to the bore of the pipe)
Trevor Clarke. (R & D) Scientific Instruments.Somerset. UK
SW2007x64 SP3.0 Pentium P4 3.6Ghz, 4Gb Ram ATI FireGL V7100 Driver: 8.323.0.0
SW2007x32 SP4.0 Pentium P4 3.6Ghz, 2Gb Ram NVIDIA Quadro FX 500 Driver: 6.14.10.7756