Bend radii conflict
Bend radii conflict
(OP)
I was just reviewing my recommended bend radii chart for dual certified 1/2" A36/44W plate.
The values for the 2 different grades are not the same, what is acceptable practice for dual certified plates.
Brad
The values for the 2 different grades are not the same, what is acceptable practice for dual certified plates.
Brad





RE: Bend radii conflict
RE: Bend radii conflict
Meeting the requirements of both means taking the more conservative of the two wherever there's a difference. In that case, you need to take the more conservative bend radius requirement (the larger one).
Hg
Eng-Tips policies: FAQ731-376: Eng-Tips.com Forum Policies