XREF problem
XREF problem
(OP)
I am having to change the directory paths for some 180 or so tif xref's that have been moved to a different folder on a different network drive. The original drawing had these ref's to a folder on a private computer....
When I change the directory path, everything works fine, preview shows up and it says that the tif has been attached... the problem is that they wont show up on the drawing......all layers have been turned on and it still wont show...
any ideas?
also, is there a faster way than doing each one of these manually?
When I change the directory path, everything works fine, preview shows up and it says that the tif has been attached... the problem is that they wont show up on the drawing......all layers have been turned on and it still wont show...
any ideas?
also, is there a faster way than doing each one of these manually?





RE: XREF problem
http://us
Good luck, Lothar
ADT 2004
RE: XREF problem
any idea as to why the tiff documents will not show up in the drawing?
RE: XREF problem
ADT 2004
RE: XREF problem
Don Phillips
http://worthingtonengineering.com
RE: XREF problem
but, the odd thing now is that only about 85% of the xrefs now show up... For some reason, there are a few that just wont show. If you look at the area where they should be, CAD knows that there is a file there, but no picture shows..
The reference manager shows good links, and everything... Sorry to be buggin ya so much, just kinda new to all of this...
RE: XREF problem