HELP NEEDED- Zencrack or Franc3D with ABAQUS
HELP NEEDED- Zencrack or Franc3D with ABAQUS
(OP)
Hi,
Could someone please tell me if I can find (online) any step-by-step tutorials as to how to use the fracture growth software Zencrack or franc3D with the finite element software ABAQUS.
Thanks in advance
Rajesh
Could someone please tell me if I can find (online) any step-by-step tutorials as to how to use the fracture growth software Zencrack or franc3D with the finite element software ABAQUS.
Thanks in advance
Rajesh





RE: HELP NEEDED- Zencrack or Franc3D with ABAQUS
h
If you are running MicroSoft, you have to load an operating system shell, but there is information on how to do this and the files that you need to load on the Cornell website.
RE: HELP NEEDED- Zencrack or Franc3D with ABAQUS
I actually have Franc3D installed on my laptop. I am aware of some tutorials offered by Cornell fracture group for setting up model in ABAQUS and working with Franc3D. I was wondering if there are any other sources online where I can get some more tutorials.
Actually I am trying to define a 3D curviplanar crack in Franc3D and I am having problem in defining the crack using crack edge co-ordinates. I am trying to manually input the initial crack front co-ordinates and for some reason Franc3D is not able to map the fault surface (I do not know why!) . Any help on this would be greatly appreciated.
RE: HELP NEEDED- Zencrack or Franc3D with ABAQUS
thread727-218118: HELP NEEDED- Zencrack or Franc3D with ABAQUS