STAADPRO
STAADPRO
(OP)
Does STAAD-PRO do reinforced concrete beam design? If so, which commands do I use?
Thanks
Thanks
When was the last time you drove down the highway without seeing a commercial truck hauling goods?
Download nowINTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: STAADPRO
See Staad's technical reference.
Visit reiengineers.com
RE: STAADPRO
http://www.bentley.com/en-US/Products/STAAD.Pro/
RE: STAADPRO
RE: STAADPRO
Depends on what you define as "do rc beam design".
It will produce one for you. Whether otr not its results are worth the paper they are written on is up to you to decide. If you want Tbeam design from a FEM analysis in STAAD then no, the results are meaningless because it does not know what a Tbeam is. If you want deflection calculations, its results are meaningless as they are short term uncracked. Probably out by a factor of 6 or more depening on the situation.
RE: STAADPRO