Gererac Exhaust Pipe Sizing
Gererac Exhaust Pipe Sizing
(OP)
Anyone familiar with a Generac Model QT080 generator? It is an 80 kW unit with a 5.4L natural gas engine. It is designed to be installed outdoors, but I have been asked to put one inside. Since we are going against the manufacturer's intent, they are not offering any help ... other than helping us to know that the warranty is void.
All I know on the exhaust is that it is 649 CFM @ 800 Deg F. I do not have any information on backpressure, etc. The generator will sit in a basement and the flue must be routed up 7 stories to the roof.
How do I size the flue pipe with no help from Generac?
All I know on the exhaust is that it is 649 CFM @ 800 Deg F. I do not have any information on backpressure, etc. The generator will sit in a basement and the flue must be routed up 7 stories to the roof.
How do I size the flue pipe with no help from Generac?





RE: Gererac Exhaust Pipe Sizing
RE: Gererac Exhaust Pipe Sizing
My question with venting any generator is it capable of +70 feet of vertical discharge for the exhaust.
Andy W.