HEC-RAS river stations
HEC-RAS river stations
(OP)
The tributary to which I am assigning river station numbers is roughly 1.2 miles long. Yet when assigning river station (RS) numbers(.047,.099,.197,.214 miles)to its four cross sections, the tributary schematic drawn in the geometric data window shows the cross sections proportionally positioned across the entire length of the tributary when in fact they should be close to the junction. What's up with that? Does it mean that I should truncate the tributary to the .214 mile RS?





RE: HEC-RAS river stations
good luck
RE: HEC-RAS river stations
RE: HEC-RAS river stations