liquid injectors(pressure swirl atomizer)
liquid injectors(pressure swirl atomizer)
(OP)
hi
i wont to design a pressure swirl atomizer but i don't know the recommended valus of some parameters to start my design.
such that(injector pressure differential,ratio of nozzel length to its diameter,cross sec area of nozzel,fuel mass flow rate)
if there is another parameters must be assumed before design please tell me about it
how can i evaluate the fuel size distripution without needing exprements(we have no lap)
note: iam not (agricultural) but i don't know how to chamge it (iam a new user tell me how)
thanks for any help
i wont to design a pressure swirl atomizer but i don't know the recommended valus of some parameters to start my design.
such that(injector pressure differential,ratio of nozzel length to its diameter,cross sec area of nozzel,fuel mass flow rate)
if there is another parameters must be assumed before design please tell me about it
how can i evaluate the fuel size distripution without needing exprements(we have no lap)
note: iam not (agricultural) but i don't know how to chamge it (iam a new user tell me how)
thanks for any help





RE: liquid injectors(pressure swirl atomizer)
Gas Turbine Combustion by Arthur H. Lefebvre, 1983 ed.
Excellent book including design info. on all kinds of spray atomizers.
RE: liquid injectors(pressure swirl atomizer)
Or, you can make a post explaining your problem and then red flag it.
First option is probably less inelegant.