64 bit NX5
64 bit NX5
(OP)
Are there any known issues with running NX5 on a 64 bit Windows XP system?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: 64 bit NX5
Regards
Simon
RE: 64 bit NX5
Spaceware Drivers of which some will work and can be fixed, have been reportedly a problem for some 64Bit users.
We haven't heard much in the way of actual modeling, drafting or machining problems where the system fails to work or won't perform certain functions. Apart from general system stability issues of which there seem to be an unfortunate amount of problems. Obviously though most users are surviving, under sufferance perhaps, but surviving most of the time well enough.
Solvers, Motion, NX-Human (Jack) seem to be no go zones.
Apart from that those general stability issues there may be not much pay off in terms of performance yet! NX-5 hasn't yet embraced the ability to use quad processors and still seems to suffer from memory slowdowns with approximately equivalent amounts of data as do 32Bits systems.
For NX-5 you'd probably rather be on 32Bit systems. But NX-6 will be available shortly so depending on your upgrade strategy you may not want to buy lots of 32Bit systems that will quickly date at this stage. It might be a good time to wait and see.
Best regards
Hudson
RE: 64 bit NX5
64bit version of NX5 will run and gain the extra memory available, but there will be a couple of odd ball issues that come up. Hopefully not a deal breaker or never run into them. For the money, I would stick with 32bit, unless you need the extra Ram for analysis or large assemblies.
-Dave Tolsma
Tolsnet LLC
http://groups.google.com/group/NX_CAX/
http://groups.google.com/group/plm-exchange/
RE: 64 bit NX5
So what you're saying sounds happily like we can have our cake and eat it too. I have a 64Bit system but I run XP-Pro 32Bit. So the investment in the system is protected because I have an upgrade path, (though probably not to Vista). In the meantime if you're having difficulties with the 64Bit version of NX then we presume that you're running one of XP or Vista 64Bit O/S. Under those circumstances are you saying that the problems with NX will go away by just running the 32Bit version? And are you able to install both at no cost in order to exercise that level of choice?
My experience with 64Bit systems has been working with systems other than my own and hearing of or dealing with the problems that other users are reporting. The upshot of this were the collected comments above. I hadn't heard it mooted that you could do both and with teamcenter it could only be more painful. But it may be worth pointing different users at different installations depending on what modules they need to use.
Best Regards
Hudson
RE: 64 bit NX5
Teamcenter runs as 32bit on all windows environments, Linux you can get the benefit of the extra memory.
-Dave Tolsma
Tolsnet LLC
http://groups.google.com/group/NX_CAX/
http://groups.google.com/group/plm-exchange/