Emigration to USA - Suggestions for Finding Work as Process Engineer?
Emigration to USA - Suggestions for Finding Work as Process Engineer?
(OP)
First off apologies if this is in the Wrong section, however it seemed the most relevant to post in.
(If it should be posted elsewhere then please, direct me)
I am writing this in the hope of relocating to the United States in the coming year (aim is January 09). I'm looking for pointers etc. to maxmise my chances of getting relevant work there.
Presentley I am working as a process engineer in a design firm. (Since Aug 06.....should have 2+ years of experience on reaching the U.S). My degree is a 4 years bachelors degree in Chemical & Process Engineering. I have also completed additional courses in Computer Systems Validation & Biopharmaceutical Validation.
I am hoping to locate in New York City and so have a few questions:
1) Can anyone suggest industries to target in NYC? (Right now I'm thinking Design, Technical Support, Site Engineer & Validation roles in Oil, Biopharma, Manufacturing, Design Firms, Pharmaceutical, Equipment Supply)
2) Regarding Process Design roles, are there a large number of these Firms in NY? (I realise this is a really vague question, but in checking the various job sites, I didn't see very many mentioned)
3) Any suggestions on things to familarise myself with before moving over? Here in Europe, I'm used to dealing with EU Directives (PED, ATEX etc..). Which American equivalvents(I assume, ASME) should I familarise myself with?
4) Any rough figures for salaries for such positions & experience?
5) Any other suggestions to maxmise my chances of finding work?
I realise the 2 years of experience isn't a whole lot but I'Il do whatever I can to compensate and maximise my chances so all suggestions are welcome.
Many Thanks.
(If it should be posted elsewhere then please, direct me)
I am writing this in the hope of relocating to the United States in the coming year (aim is January 09). I'm looking for pointers etc. to maxmise my chances of getting relevant work there.
Presentley I am working as a process engineer in a design firm. (Since Aug 06.....should have 2+ years of experience on reaching the U.S). My degree is a 4 years bachelors degree in Chemical & Process Engineering. I have also completed additional courses in Computer Systems Validation & Biopharmaceutical Validation.
I am hoping to locate in New York City and so have a few questions:
1) Can anyone suggest industries to target in NYC? (Right now I'm thinking Design, Technical Support, Site Engineer & Validation roles in Oil, Biopharma, Manufacturing, Design Firms, Pharmaceutical, Equipment Supply)
2) Regarding Process Design roles, are there a large number of these Firms in NY? (I realise this is a really vague question, but in checking the various job sites, I didn't see very many mentioned)
3) Any suggestions on things to familarise myself with before moving over? Here in Europe, I'm used to dealing with EU Directives (PED, ATEX etc..). Which American equivalvents(I assume, ASME) should I familarise myself with?
4) Any rough figures for salaries for such positions & experience?
5) Any other suggestions to maxmise my chances of finding work?
I realise the 2 years of experience isn't a whole lot but I'Il do whatever I can to compensate and maximise my chances so all suggestions are welcome.
Many Thanks.





RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
First of all, New York city is the poorest choice you could make if you wish to find work as a chemical engineer in process design.
Your best bet for finding that type of work is with one of the major engineering and construction companies such Foster Wheeler, Fluor Daniel, Parsons, Jacobs, Bechtel, Kellogg Brown & Root (KBR), and Aker Kvaerner. None of them have any engineering offices in New York city although they may well have sales offices there. Most of them are either in Houston, Texas or in California. The cost of living in the New York city area makes it much too costly for those companies to recruit employess.
If you are from the UK (all your posting says is Europe), I am quite sure that most, if not all, of the above companies have engineering offices in London. You would do well to contact them for information about job opportunites in their USA offices.
Good luck!
Milton Beychok
(Visit me at www.air-dispersion.com)
.
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
Thanks for that. I'm actually located in Ireland.
Unfortunately it has to be New York (its not my choice to make). I was also looking at New Jersey in terms of jobs and there seemed to be a number of positions. I'm not sure about commutable distances etc. though.
Any general pointers about working in the U.S are also appreciated.
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
PFIZER'S main plant is in Graumont,NJ. They still have a Pharmaceutical plant in Ireland. You may get a lead there.
Offshore Engineering&Design
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
The residence has to be in NYC (long story...).
To those familiar with that area can you suggest areas (with employment potential) within a reasonable commute from NYC?
So far I see the options as follows:
Jersey City
Bayonne
Please suggest any I may be missing.
Again, any other suggestions are welcomed.
Thanks.
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
I agree with the advice already given. Below is a job search from monster.com for jobs within 40 miles of NYC for Chemical, Process, Engineering jobs. Good luck.
http://job
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
Remember to change the spelling and terminology on your resume.
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
KiwiMace, I assume the PE is some kind of process engineer society exam? I'm guessing its the equivalent to chartered engineers with the iChemE in the U.K.
You mention that the EIT is a fine start, can you clarify as to what this is?
Thanks for the monster search, vzeos - as I get a better idea of things I'm able to pinpoint potential areas and jobs. I hope to have a good understanding of things in the U.S before heading over
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
PE is Professional Engineer, a designation similar to the Chartered Engineer as you gleemed. Requirements are fundamentals exam , several years experience, and another exam particular to your brand of engineering.
EIT is Engineer in Training, a stepping stone designation towards getting your PE, where you have passed the Fundamentals exam only. This exam is 8hrs long, fairly hard and covers the whole gamut.
Go search the forum "How to improve myself to get ahead in my work" and you'll probably find more info and possibly me lamenting further on this subject.
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
If you can drive, maybe rent a garage in those cities and also register the car in NJ ( bending the rules a little), and move thru NJ . But the eng companies in NJ have a large core of people that also commute from NYC or Long Island, so carpooling with them would make a lot of sense.
Don't be surprised to find that your income taxes in NYC will be over 50% of gross income ( adding up federal, state and city taxes).
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
I now need to read up on the American tax system too it seems:)
Wow, 50% is a lot.
The tax here works out as 46% of your gross, but only after a set point (approx €35000, this is at 25% - minus tax free allowances)
Does NYC not allow a certain level to be reached before 50% would kick in? I would have thought so - to support lower income earners?
Any idea how NJ compares? (Perhaps 25% going from the post above?)
Thinking purely on monetary terms, would living in NYC and commuting into NJ be a bad idea? I assume the NJ salary would not reflect the higher cost of living in NYC?
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
New Jersey has a large pharmaceutical industry as well as quite a few refineries and chemical plants. There are also several E&C companies located there. Foster Wheeler and (recently ABB) Lummus both have their world headquarters in NJ. There were quite a few more a one time, but it's been quite a while since I lived in the area, and I'm not sure how many are still standing. Even NYC used to have some E&C companies within my memory. (But I'm no spring chicken.) There was Ebasco in downtown Manhattan. There are power plants and universities and who knows what other potential employers in NYC. Nearby New Jersey, Connecticut, and New York state are all "do-able". So, my suggestion is to go for it.
Good Luck,
Doug
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
Simple Process Controls including liquid level alarms. www.drumalarm.com
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
Did you successully emigrate to the U.S? If so, a few questions:
1) Did you find companies were receptive to not being legal to work at the time of interviewing?
2) Can you outline what is involved in the paperwork aspect, I have yet to fully investigate this. Did the company assist in any way?
3) From what I've seen, New Jersey seems more promising.
As I say, it has to be NYC for living (that is beyond my control). However commuting (within reason--> 1 hour each way maybe?) would not bother me.
Are there viable areas within NJ which are within Commuting distance of NYC?
4) Did you make any preperations, before leaving, which you found particularly beneficial?
Many Thanks.
RE: Emigration to USA - Suggestions for Finding Work as Process Engineer?
I believe that Process Systems Enterprise are currently looking for Process Engineers to help sell their gPROMS dynamic modeling software.
I think they are based in NJ but you should do a search on them and check out the details. A friend of mine was contacted by a head hunter recently and the package sounded pretty good.
Regards
Goggs