Ultrasonic Examination of Plate
Ultrasonic Examination of Plate
(OP)
I have a 45mm Thick plate that has an area of lumellar inclusions noted at 23mm over an area of 400mm at it's widest point and 30mm at the narrowest point and is 1750mm from it's widest to narrowest point. The inclusion reflectors are 20% - 50% of the DAC Curve. What if any impact does this has on the structural durability of the plate?





RE: Ultrasonic Examination of Plate
RE: Ultrasonic Examination of Plate
Steve Jones
Materials & Corrosion Engineer
http://www.pdo.co.om/pdoweb/