Platforms for runnig of I-Deas
Platforms for runnig of I-Deas
(OP)
Hello,
Can anybody write to me how platform (operating system and version of the OS) using for work in I-Deas, mainly for version 7 and 12, and how is the hardware configuration.
Especially interrest me, exist the I-Deas 7 for HP-UX? If yes, how can I download it?
We use "I-Deas 12 NX" on "HP c8000" with "HP-UX v11i" in our company.
Early, to May 2005 we used "I-Deas 8" on "SGI Octane" with "Irix 6.5.22". (SGI workstations were great machines)
Thank you,
Grco
Weapon designer
Can anybody write to me how platform (operating system and version of the OS) using for work in I-Deas, mainly for version 7 and 12, and how is the hardware configuration.
Especially interrest me, exist the I-Deas 7 for HP-UX? If yes, how can I download it?
We use "I-Deas 12 NX" on "HP c8000" with "HP-UX v11i" in our company.
Early, to May 2005 we used "I-Deas 8" on "SGI Octane" with "Irix 6.5.22". (SGI workstations were great machines)
Thank you,
Grco
Weapon designer





RE: Platforms for runnig of I-Deas
As fas as i know I-DEAS is ported to:
Windows: NT,2000,XP,Vista
UNIX: HP-UX, IRIX, Solaris, AIX
Yes I-Deas 7 for HP-UX exists but i though you can't buy it from UGS anymore.
RE: Platforms for runnig of I-Deas
We bought I-Deas 7 for IRIX in 1997, i think, but we lost installation media. Now I need installation data for HP-UX, mainly for "Plotting", because we have problems with direct printing in I-Deas 12. There are wrong width of lines or we cannot right connect a plotter (old HP DesignJet 800) to HP-UX and I-Deas. It's printing after some hours or it's not printing.
Can you help me with connecting this plotter to HP-UX and then to I-Deas?
Plotter is connect to local network by FTP cable.