ACFM for Chloride Cracking
ACFM for Chloride Cracking
(OP)
Does anyone have a good feel for the ACFM technique for detecting Chloride Cracking in 316L S/S grade material, 3/8th thick. The cracking is external on a pressure vessel. Failure Analysis of a sample piece concluded that the cracking is only about 0.030" - 0.040" in depth, scattered at attachment welds (i.e. lifting lugs, stiffener rings, re-pads).





RE: ACFM for Chloride Cracking
I just called a supervisor for a large inspection company about your approach. He stated that he hasn't been directly involved with the introduction of ACFM to his company and hasn't heard of any explicit applications in detecting SCC. They do a lot of work offshore and that is where their interest is. He also stated that it would be a good application to qualify.
RE: ACFM for Chloride Cracking
= = = = = = = = = = = = = = = = = = = =
Plymouth Tube