Count number of Holes
Count number of Holes
(OP)
Does anyone know how to count the number of holes in a part that are formed by the extrude command? I would also like to be albe to do this based on hole diameter. Thanks in advance
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Count number of Holes
Regards: Dimo Urumov
Aircraft Engineer
Plovdiv, Bulgaria
RE: Count number of Holes
RE: Count number of Holes
In the MoldWizard bar look for Assembly drawing button. Next to it there is a small arrow. Click on it and you'll find Hole Report button.
Regards: Dimo Urumov
Aircraft Engineer
Plovdiv, Bulgaria
RE: Count number of Holes
RE: Count number of Holes
RE: Count number of Holes
John Joyce
Tata Technologies iKS
1675 Larimer St.
Denver, CO
www.myigetit.com
RE: Count number of Holes
RE: Count number of Holes
As far as writing GRIP - there is an extensive amound of data in the help docs.
John Joyce
Tata Technologies iKS
1675 Larimer St.
Denver, CO
www.myigetit.com
RE: Count number of Holes
RE: Count number of Holes
It is a work around solution at best, but it seems like we're struggling to find a better answer.
Regards
Hudson
RE: Count number of Holes
RE: Count number of Holes
Now if it's that critical that one or two users have a need for something like this, then perhaps someone could write a program using NX Open to perform such as task (there are many out there who do this for a living by the way). After all, that's why we took the effort of providing what many consdier to be the most OPEN product on the market with some of the most powerful customization tools available just for such situations as meeting the obscure and/or proprietary needs of our customers.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
http://www.siemens.com/plm
http://www.plmworld.org/museum/