sand shear
sand shear
(OP)
Hi,
assuming Medium Subrounded SAND (0.25 - 0.5 mm) i would like to estimate the force required (virtually staight pull) to remove an umbilicle burried at 0.8m at a 30meter water depth.
Could someone point me in the right direction please?
thanks
Patrick
assuming Medium Subrounded SAND (0.25 - 0.5 mm) i would like to estimate the force required (virtually staight pull) to remove an umbilicle burried at 0.8m at a 30meter water depth.
Could someone point me in the right direction please?
thanks
Patrick





RE: sand shear
f-d
¡papá gordo ain’t no madre flaca!
RE: sand shear
lenght of the umbilical is 5km, but less relavant as a vessel moves allong while the umbilical is pulled in (so a virtual straight pull will be maintained).
Many thanks
Patrick