Fellows Taper
Fellows Taper
(OP)
Does anyone know, how to get data on a Fellows taper #1?
All of my handbooks are absolutely silent on the subject.
All of my handbooks are absolutely silent on the subject.
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Fellows Taper
See: http://www.eng-tips.com/viewthread.cfm?qid=14408
Timelord
RE: Fellows Taper
Fellows Shank cutter tapers:
#1 morse, with 0.4750" Gage dia, by 1.000" long.
#2 morse, with 0.7000" Gage dia, by 1.500" long.
Fellows Short Taper, 1.0625" Gage dia, by 1.500" long.
Fellows Long Taper, 1.0625" Gage dia, by 2.250" long.
All with appopriate drawbar thread in the ends.
IIRC, Ash gear used to have the data in their catalog and also carried a good selection of adapters.
Cheers,
Winston H.