Drafting Dimension Pink Color
Drafting Dimension Pink Color
(OP)
I am having a problem with drafting dimension link loss.
I was under the impression that Catia will change a dimension from black to pink if the link is lost (due to
model geometry change. etc..). On a particular drawing the
dimensions are black on my station. When I call up this drawing on another machine the dimensions show up as pink.
Is there a setting I need to be aware of. Any help would be
appreciated.
I was under the impression that Catia will change a dimension from black to pink if the link is lost (due to
model geometry change. etc..). On a particular drawing the
dimensions are black on my station. When I call up this drawing on another machine the dimensions show up as pink.
Is there a setting I need to be aware of. Any help would be
appreciated.





RE: Drafting Dimension Pink Color
RE: Drafting Dimension Pink Color
This icon is in the Drafting TOOLS toolbar. It is the one that look like a horizontal dimension with a magnifier on the top right. On the right side of the snap to grid icon. The name of the function is Analysis Display Mode.
indocti discant et ament meminisse periti
RE: Drafting Dimension Pink Color
I appreciate your help.