din 5480 specs
din 5480 specs
(OP)
We are building a involute spline w12 x .5 x 30 x 22 t8 din 5480 with a major dia. of 11.54mm h11 and minor dia. of 10.45mm h14, does anyone know the tolerances for h11 and h14? If not please point me in the right direction for the specs.
Thanks
JKN
Thanks
JKN





RE: din 5480 specs
For basic sizes above 10 mm and up to and including 18 mm:
h11: +0/-110 um
h14: +0/-0.43 mm