×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Weeping Tile

Weeping Tile

Weeping Tile

(OP)
How does one join the "sock"-covered weeping tiles?

Can you just overlap two tiles say one foot and hope that the flow upstream goes into the downstream tile offset to the side, providing it slopes say 3" in 10'?

I bought two tiles each with a sock covering the plastic tile. I opened up the knotted end to try to figure which was the top side i.e. with perforations. It looked like the openings were staggered all around the circumference.
I thought the perforations should be only on the top.

Can anyone please help me withe these questions as Donna is getting mad at me taking too long with this job.

Thanks in advance from Ted-the-perfectionist!

RE: Weeping Tile

Most perforated drain pipe is flared on one end so that there are male and female ends to each pipe.  Lacking a flared end you would use a coupling.  BTW the perforations are placed on the bottom so that the water doesn't have to build up to the top of the pipe before draining.

RE: Weeping Tile

There should be pipe connectors available where you got the pipe.
Perforations top or bottom not critical, you can get "experts" arguing vehemently for either case. (I'm on the "bottom" side). With perforations all around then it doesn't matter how you orient it.
3"/10' is a lot of slope for a subdrain, though not a problem if site allows for it.  Subdrains are often installed level, or 0.5% is plenty (0.05' in 10').

You might check out this site for data, specs, etc.

http://www.hancor.com/product/gravelless.html

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources