Ansys Workbench Pin Joints (end node release)
Ansys Workbench Pin Joints (end node release)
(OP)
Had anybody produced an automatic command script to release end moments of all beams (beam188) or found a way of changing the beam elements from beam188 to link8 elements. I have a complex 3D truss type structure.
I thought there would have been an option in workbench to change the element type from beams to spars for simple analysis.
Thanks
P.S. Im working in workbench 11.0
I thought there would have been an option in workbench to change the element type from beams to spars for simple analysis.
Thanks
P.S. Im working in workbench 11.0




