Modify Form Feature
Modify Form Feature
(OP)
Hi,
I have draged and dropped a Lancing operation on a sheetmetal surface. I am unable to make any changes to the sizes of it.
I need to change the size of teh lance from 1" x .5" to 0.5" x0.25"
My steps :
1. drag & drop the lance form tool
2. edit sketch from the feature manager tree
3. The sketch appaears blue in color ( Meaning its not constraint)
4. When I try adding dimension, it would not allow.
5. When I try changing the lengths of the lines in the property manger it still would not allow.
can some body help me.
Thanks
BMR
I have draged and dropped a Lancing operation on a sheetmetal surface. I am unable to make any changes to the sizes of it.
I need to change the size of teh lance from 1" x .5" to 0.5" x0.25"
My steps :
1. drag & drop the lance form tool
2. edit sketch from the feature manager tree
3. The sketch appaears blue in color ( Meaning its not constraint)
4. When I try adding dimension, it would not allow.
5. When I try changing the lengths of the lines in the property manger it still would not allow.
can some body help me.
Thanks
BMR






RE: Modify Form Feature
Jeff Mirisola, CSWP
CAD Administrator
SW '07 SP2.0, Dell M90, Intel 2 Duo Core, 2GB RAM, nVidia 2500M
http://designsmarter.typepad.com/jeffs_blog
RE: Modify Form Feature