Thread Pull-Out Calculations in A36 Steel
Thread Pull-Out Calculations in A36 Steel
(OP)
Can someone explain how to calculate the amount of load required to pull internal threads out of A36 plain carbon steel? Or point me inthe direction of a website that can offer some help.
My current situation:
A36 steel plate 3/4" thick
Grade 5 bolt (1/2-13) with 5/8 depth of thread engagement in the A36 plate. I need to know how much force in lbs-in^2 the threads will hold before failure.
Thanks in advance,
Drake
My current situation:
A36 steel plate 3/4" thick
Grade 5 bolt (1/2-13) with 5/8 depth of thread engagement in the A36 plate. I need to know how much force in lbs-in^2 the threads will hold before failure.
Thanks in advance,
Drake





RE: Thread Pull-Out Calculations in A36 Steel
Look in the machinery's handbook
regards
desertfox
RE: Thread Pull-Out Calculations in A36 Steel
available at:
http://assist.daps.dla.mil/quicksearch/
Regards,
Cory
Please see FAQ731-376: Eng-Tips.com Forum Policies for tips on how to make the best use of Eng-Tips Fora.
RE: Thread Pull-Out Calculations in A36 Steel
RE: Thread Pull-Out Calculations in A36 Steel
CBL - That site is a goldmine of information, thank you.