×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Dimensioning

Dimensioning

Dimensioning

(OP)
Is it possible to break a view around a dimension? I tried the "Broken View" command but it does not allow me to hide the break lines.

Thanks

RE: Dimensioning

Correct me if I am wrong but it sounds like you're trying to trim the break lines to the edge of the part?

Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
      o
  _`\(,_
(_)/ (_)

(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right."  -- George Best

RE: Dimensioning

(OP)
Yes I am trying to break a line of a part

RE: Dimensioning

CorBlimeyLimey,
I am blocked from all 4 of the listed sites.

Bradley
SolidWorks Premim 2007 x64 SP3.1
PDM Works, Intel(R) Pentium(R) D CPU
3.00 GHz, 4 GB RAM, Virtual memory 12577 MB, nVidia 3400

RE: Dimensioning

Go to Tools > Options > Detail see the Break line extensions setting.

Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
      o
  _`\(,_
(_)/ (_)

(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right."  -- George Best

RE: Dimensioning

Set that to Zero and it will eliminate the breakline extending past the part line.

Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
      o
  _`\(,_
(_)/ (_)

(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right."  -- George Best

RE: Dimensioning

Bradley .... That must be your IT peoples doing. Can you access them from home?

cheers

RE: Dimensioning

CorBlimeyLimey,
Yes it is our IT. I can see it from home.

Bradley
SolidWorks Premim 2007 x64 SP3.1
PDM Works, Intel(R) Pentium(R) D CPU
3.00 GHz, 4 GB RAM, Virtual memory 12577 MB, nVidia 3400

RE: Dimensioning

(OP)
But how do I eliminate the break line all together? I just want to break the part lines without leaving any other lines. Very similar to how to looks when you break dimension lines around one another.

RE: Dimensioning

I think I understand what you're wanting.  You want to have a "gap" in the object line (part edge) for the dimension's witness line to pass through.  I don't think you can do that.  I'm not too familiar with dimensioning standards, but I doubt that would be acceptable under any of the "standard" standards.

RE: Dimensioning

I would just change the line type of the breakline so it appears to be a part line.  Anything more than that I think you're asking for something that is not "standard" in drawing practices.

Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
      o
  _`\(,_
(_)/ (_)

(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right."  -- George Best

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources