Avoiding Construction lines and Circle centers in printouts.
Avoiding Construction lines and Circle centers in printouts.
(OP)
Is is possible to hide construction line in drawings? I have a drawing that is symmetric about a centre line (for construction) . Now i want the print out not to show the centre-line. How can i do this?
I tried to give the centre line same color as background which avoided this line but the intersections of this center line with other lines has some cross marks that are still in default color.
Also i don't want to print centers point marks of the circles.
thanks,
Noda DOF
I tried to give the centre line same color as background which avoided this line but the intersections of this center line with other lines has some cross marks that are still in default color.
Also i don't want to print centers point marks of the circles.
thanks,
Noda DOF






RE: Avoiding Construction lines and Circle centers in printouts.
SW07-SP3.1
SW06-SP5.1
RE: Avoiding Construction lines and Circle centers in printouts.
Per CBL, you can hide them.
Chris
SolidWorks 07 3.0/PDMWorks 07
AutoCAD 06
ctopher's home (updated 04-08-07)
RE: Avoiding Construction lines and Circle centers in printouts.
ctopher: i am not using it for engineering parts. its for some other drawings showing lay-outs that people usually do in autocad.
RE: Avoiding Construction lines and Circle centers in printouts.
SW07-SP3.1
SW06-SP5.1
RE: Avoiding Construction lines and Circle centers in printouts.
Chris
SolidWorks 07 3.0/PDMWorks 07
AutoCAD 06
ctopher's home (updated 04-08-07)