×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Stopping unqualified people from doing work (?)

Stopping unqualified people from doing work (?)

Stopping unqualified people from doing work (?)

(OP)
Someone from another group in my company asked to borrow a sound level meter (for the techies, a B&K type-1 logging SLM).  I didn't have a problem letting them use it and enquired as to what the project was.

The person was going to do some mould sampling (their speciality) and as part of the inspection, was asked to take sound levels in the room.  The report was going to a client.

Now, the person who asked to borrow the SLM knows nothing about noise (to the point he asked what decibels were).  I mentioned that maybe someone should join him and take the measurements instead, since this information was going to form part of a report, and released to the public, and there's a risk involved in someone just putting numbers down without understanding what they mean.
(again, for the techies, NC or RC would be more appropriate here).

The response was "how hard is it to just measure levels and say 'the measured level in the room is ...'".

What do you say to that?

I was a bit concerned so enquired more about why the client wanted noise levels, what was to be measured etc etc but it turns out that the guy didn't know any of those details.  His PM prepared the quote and simply instructed him to go out and measure.  The PM was not available at all.

If it were something internal, I'd care less but seeing as we are in safety consulting, and clients hire us for our "expertise", should I have done more?

I just explained as best I could to the person what to measure (average Leq for 30 sec) and put some disclaimers in the report.

RE: Stopping unqualified people from doing work (?)

I don't know.

Maybe it would help if we take a step back and look at this from another perspective:

Let say I am that person, and what I am doing is taking a mold measurement (my specialty). Let say again that my PM is just curious as to what the sound level is in the room. So, I take a reading (how hard can it be). Since the sound reading isn't really part of the report, and was not asked by the client, it doesn't really matter then. Also, we're just goofing around with the B&K type-1 logging SLM because we know you have one.

Until you know more about what the other guy is doing, there is no real need to panic. Assuming the other guy is otherwise proficient, trustworthy and professional, I would usually give them the benefit of the doubt. Chances are, they are just playing with a new toy - haven't we all done that?

"Do not worry about your problems with mathematics, I assure you mine are far greater."   
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?

RE: Stopping unqualified people from doing work (?)

(OP)
Unfortunately the client did ask for it specifically.  And we've had the unit for years, and he's been around for as long.  It's just this is the first time someone asked for mould and noise.  

RE: Stopping unqualified people from doing work (?)

Talk to the PM when available, explain your concerns, and see if you can debrief the guy who did the measurements. If the PM is concerned about your cost, do it as overhead. Perhaps he did it correctly (to your satisfaction) and you can help them write up the data so it is up to the company standard.  If the readings are not good, then state that to the PM, and tell them they need to have it done correctly.

Just remember:  "Is this good for the company?"

RE: Stopping unqualified people from doing work (?)

I hope your company doesn't have the word engineers in their title or advertisments.  If so, get a lawyer....

If the PM promised the work and is on a budget, he should just eat the cost to take someone along give the PM a lesson and mark the time to internal training.  Once he see's all the switches and different averageing systems, he'll understand.  If you really want to get his goat, put dead batteries in it and tell him he broke it...

Personally, I've borrowed the Garmin GPS to see how my cheapy one compared to the $5000 model.  I'd never stamp a drawing with data I took unless I had several training classes.

RE: Stopping unqualified people from doing work (?)

To answer your question:"
How to stop unqialified people from doing work"
Easy:
Get the sound meter back and tell him that you don't feel confortable to borrow this to him unless his PM comes to talk with you.

RE: Stopping unqualified people from doing work (?)

We do take sound measurements as part of our safety consulting business-if a client wants a written report, we use dosimeters and compare results against OSHA PELSs.  If they just want an idea of their general levels, we will take the direct read meter and give them an idea if they are nearing the OSHA threshold, but it would not be a written report, as so many factors can influence the results.  I think you need to make the point to the PM that unless the tech is trained to use the equipment properly, including documentation of the survey, the results are useless.

RE: Stopping unqualified people from doing work (?)

In that case, maybe you do have a problem.

I guess you need to bring it up with the PM.

"Do not worry about your problems with mathematics, I assure you mine are far greater."   
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?

RE: Stopping unqualified people from doing work (?)

One question:  What qualification do you need before you are allowed to wave an SLM around?  I would have said "experience".

RE: Stopping unqualified people from doing work (?)

SomptingGuy,

I would say proper knowledge.

"Do not worry about your problems with mathematics, I assure you mine are far greater."   
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?

RE: Stopping unqualified people from doing work (?)

Any reason you didn't offer to help?

Charlie
www.facsco.com

RE: Stopping unqualified people from doing work (?)

(OP)
I did offer, was told "how hard can it be" etc.
The PM is ignoring calls and out of the office for the last few days.
Training to use the machine isn't that tough, but understanding what is being measured isn't that easy :)  I offered to help on that but their deadline was in 2 days and I was occupied those two days.  I offered a junior to help (for free!) and they still said no.

RE: Stopping unqualified people from doing work (?)

If PM is not available, or "too busy" to return your calls, escalate the problem. Remember, a problem with authorities or clients is not a problem from this or that person, is a problem of ALL organization.

RE: Stopping unqualified people from doing work (?)

I worked in a company in which sales dominated over engineering. One dumb sales person pretended to be able to engineer gearmotors and select motors to drive applications. I set him straight and informed his boss about it.

This same sales person was picking my brain about how to improve BBQ safety features, not once but on several occasions. I even made design sketches for him. I found out later that he received BBQ's from this 'customer' in exchange for free engineering advice at my expense. This was reported to his boss, but I believe his boss received a complimentary BBQ also. I didn't have the benefit of working with an existing BBQ set. SOB!

RE: Stopping unqualified people from doing work (?)

(OP)
Update.  
Turns out the client was completely taking advantage of the mould people.  As a follow-up, the PM spoke with the client, who proceeded to ask if he can get RC values for each room as well as Articulation Index(sp?).  
The PM proceeded to explain that they agreed only to provide sound levels in the room and that's all they would be providing.  Right now there's discussion between the client and PM (but that's not my concern) as to what were the deliverables.

Personally, the client's somewhat sleezy for taking advantage of someone's lack of knowledge.  But on the other hand, the PM should not have simply said "yes, we can do it" without actually understanding what was required.

RE: Stopping unqualified people from doing work (?)

SylvestreW,

Yup. The PM needs to know his/her own limitation. If the PM goes ahead and agrees to something - well, it's really not the client's fault.

"Do not worry about your problems with mathematics, I assure you mine are far greater."   
Albert Einstein
Have you read FAQ731-376: Eng-Tips.com Forum Policies to make the best use of Eng-Tips Forums?

RE: Stopping unqualified people from doing work (?)

As an aside, AI and RC are perfectly sensible tests, but RC in particular is not just a case of pressing a button and writing the answer down.

Cheers

Greg Locock

Please see FAQ731-376: Eng-Tips.com Forum Policies for tips on how to make the best use of Eng-Tips.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources