T60 UR Relay
T60 UR Relay
(OP)
Having issues with the communication to a UR relay, think it's a networking issue and just looking for some quick info, right now our switch that the UR is plugged into is set to 1/2 duplex, I the UR is set to full duplex, need to make this change just wondering about the speed, whether it should be set to 100 or 10 within the switch,
Thanks
Thanks






RE: T60 UR Relay
RE: T60 UR Relay
RE: T60 UR Relay
If you are using TCP/IP, you'll have to set an IP address for the relay.
RE: T60 UR Relay
If the port is capable of 100 Mbps speed, it will autodetect the network packet speed and respond in kind. If not, I would guess it needs to see 10 Mbps.
Regards,
JB