Hamer Blinds
Hamer Blinds
(OP)
Has anyone had a positive experience with hamer blinds in organic service?
I also need to know if you are in an area that would regularly measure the flange of the hamer blind for VOC leaks.
I need to give our operators a safe alternative to our current setup of blinding the furnaces in our ethylene plant.
My company currently only has three applications:
1. Crude C4 rail car loading service (no problems with leaks) at 80 PSIG
2. Decoke air on a furnace (leaks like a sieve -- no PMs)
3. Flare header blinds at 2 PSIG
Any information would be greatly appreciated.
Thanks,BCJ
I also need to know if you are in an area that would regularly measure the flange of the hamer blind for VOC leaks.
I need to give our operators a safe alternative to our current setup of blinding the furnaces in our ethylene plant.
My company currently only has three applications:
1. Crude C4 rail car loading service (no problems with leaks) at 80 PSIG
2. Decoke air on a furnace (leaks like a sieve -- no PMs)
3. Flare header blinds at 2 PSIG
Any information would be greatly appreciated.
Thanks,BCJ





RE: Hamer Blinds
thread378-164215
I never did find a good solution using a single device. Double block and bleed arrangemens (w/blinds) was left on the table for consideration.