BOM
BOM
(OP)
Is there a way to link the "summary information" from a part (file/properties) to the design table? Basically I want my BOM to list information that is in my design table.
Thanks
Thanks
When was the last time you drove down the highway without seeing a commercial truck hauling goods?
Download nowINTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: BOM
There's not a whole load of information, but should be enough to get you going.
SW07-SP3.1
SW06-SP5.1
RE: BOM
When you insert a BOM, the default settings will draw on the design table items to create descriptions, and count quantities. If you move items on the design table, they move on your bom (if you have "automatic BOM update" turnned on in the document properties).
When you balloon the items out, the item number will automatically be tied to your BOM table.