Export from Rhinoceros
Export from Rhinoceros
(OP)
Hi!
I made the geometry of a 3d model with the program Rhinoceros.
Which’s the best way to export that to a SAP2000 model? ¿igs, dxf?
Thanks
I made the geometry of a 3d model with the program Rhinoceros.
Which’s the best way to export that to a SAP2000 model? ¿igs, dxf?
Thanks





RE: Export from Rhinoceros
DXF is fine.
http://www
Good luck.
Shdma
RE: Export from Rhinoceros